Cookie Policy

This website works best using cookies. You can find out more and change your settings any time but by continuing you agree to this.

 
Council Services:

Log burner fires prompt safety warning from Lincolnshire Fire and Rescue

28 November 2017

Lincolnshire Fire and Rescue are warning of the risk of fire if log burners are not fitted professionally.

log burning fire place

Indoor fire place

The emergency service has been called out to two serious incidents in the last two weeks, one of which saw the owner/occupier of a static caravan lose two beloved pets.

In both cases the cause has been put down to the use of log burning stoves which had not been professionally installed.

Community fire safety manager Shona Wright said: “We would always recommend that people have their log-burning stoves fitted by competent and properly qualified engineers.
“There are legal requirements and regulations related to the use and installation of woodburners, it is definitely not something that you should carry out yourself.”

In the last two weeks Lincolnshire Fire and Rescue have been called to a mobile home on Chapel Lane, North Hykeham when a static caravan was severely damaged by fire, with the cause being put down to heat radiating from an incorrectly installed log burner.

On Sunday, a static home and its contents were destroyed at Station Road, Old Leake and again, investigating officers put the cause down to a log burner which had not been installed professionally.

Dan Moss, group manager prevention and protection, said: “We are seeing an increase in people wanting to install their own log burners.

“Whether it is a house or a static caravan the advice is exactly the same. Special precautions need to be taken and regulations need to be adhered to.

“This is not an area to cut corners on - it is vital these burners are always installed by fully qualified and HETAS registered engineers, and checked regularly.

Lincolnshire Fire and Rescue recommend the following:

  • Always follow the instructions for use.
  • Do not overload the burner and only burn fuels that are recommended by the manufacturer.
  • Keep your burner clean, brush out flue passages once a month.
  • Have your chimney swept once a year.
  • The burner should be installed and regularly serviced by a competent and qualified engineer.
  • Ensure the room is well ventilated.
  • If you are burning wood it must be dry and well-seasoned.
  • A carbon monoxide detector should be installed to monitor levels within the area of the burner.

 

Did you find what you were looking for?

Please give us your name, email address and any comments you have.

Last updated: 29 November 2017

Bookmark with:

What are these?

 
 

Powered by Webstructure.NET