Lincs Laboratory extracts more than 5,000 road samples every year to help the county council make informed maintenance decisions, check quality and get the best value from public investment.
Understanding what lies beneath a road’s surface is essential to keeping Lincolnshire’s highways in good condition and ensuring maintenance funding is spent effectively.
Lincs Laboratory, Lincolnshire County Council’s specialist highways and construction materials laboratory, extracts more than 5,000 samples, known as cores, from roads and footways every year. Together, these samples are estimated to weigh between 40 and 60 tonnes.
Supporting better decisions across the network
The laboratory’s testing helps turn physical evidence into practical advice for highway maintenance and construction. By identifying problems more accurately and checking workmanship, the council can make better-informed decisions about where work is needed and what treatment is appropriate.
Cllr David East, executive member for highways at Lincolnshire County Council, said: “Looking after Lincolnshire’s roads is a significant responsibility, and residents rightly expect us to make careful use of public money.
“Lincs Laboratory’s specialist work helps us understand what roads need, check the quality of new construction and make decisions based on evidence rather than guesswork. This can help us target maintenance more effectively, avoid unnecessary spending and get better long-term value from the investment we make in the county’s highways.”
Taking a closer look beneath the surface
The laboratory operates three towable coring rigs and two smaller portable versions, which can be used where access is more difficult.
The rigs use hydraulically powered, diamond-tipped drilling equipment to remove cylindrical samples of asphalt or concrete. Each operation requires two people: one to operate the rig and another to help position it safely, measure and package the sample, and record exactly where it was taken.
A typical sample from a newly constructed road is 150mm in diameter and can weigh around 7.5kg.
The equipment can extract cores up to 450mm long in a single operation, with extensions used where deeper samples are needed.
Chris Neal, laboratory services manager at Lincolnshire County Council, said: “A core gives us a direct look at the materials beneath the road surface. We can establish how thick the different layers are, assess their condition and, where necessary, test their composition and physical properties.
“That information is particularly valuable when investigating an existing road. Surface defects don’t always tell the whole story, and understanding what is happening underneath helps engineers identify the likely cause of a problem and design a more appropriate, durable repair.”
Helping every pound go further
Coring supports both the investigation of existing roads and quality checks on new construction.
For older roads, samples help establish the depth and condition of pavement layers and identify the presence of road tar, which was commonly used in the past and is now recognised as a carcinogen. Identifying it allows the necessary safety precautions and disposal arrangements to be put in place.
For new roads, footways and maintenance schemes, cores provide direct evidence that the correct materials have been used, laid to the required thickness and compacted properly. Further laboratory testing can assess strength, stiffness and material composition, including whether the proportions of binder and aggregate match the declared specification.
Without this testing, engineers would have to rely more heavily on survey information and visible surface defects when planning repairs. That could mean misdiagnosing problems, choosing unsuitable treatments and spending public money on repairs that deteriorate sooner than expected.
Chris added: “For new construction, coring is a key way of verifying what has actually been laid. We can measure the layer thickness and density, and carry out further tests to investigate material performance and composition.
“We also use equipment such as the Rolling Straight Edge and Texture Meter to assess road smoothness and surface texture. These checks help us build a fuller picture of the finished road, including characteristics linked to ride quality, braking and road noise.
“All of this allows us to play an important role in independently checking the quality of works carried out by contractors on behalf of the county council. By scrutinising materials, workmanship and compliance with specifications, we're able to hold contractors accountable and ensure the work residents are paying for meets the standards we expect.
“If issues are identified, contractors are required to rectify them at their own cost. This protects taxpayers from poor-quality work, reduces the likelihood of repeat maintenance and helps ensure our roads provide lasting value.
For more information about Lincs Laboratory, visit www.lincolnshire.gov.uk/lincslab.